4 Things To Do When Your Commercial Heating System Fails To Produce Heat

During the cool months, your heating system will likely run throughout the day to keep your commercial building comfortable. Unfortunately, unkempt heating systems break down when subjected to long operating hours. This could mean spending night shifts in a cold workplace. If your heating system doesn't serve your needs, something is certainly amiss and needs to be investigated. The following are things to do before and during heating system repair.

1. Safety First

If your heating system relies on natural gas to warm your commercial building, you might want to pay attention to any unusual odors. Getting a carbon monoxide detector is essential when you use natural gas for heating purposes because the gas is poisonous if it leaks from the heating system. Investigate your commercial building for an unusual rotten egg smell that may indicate you have a gas leak.

The gas is flammable and might expose you and your workers to safety hazards. Evacuate your employees, open the windows, switch off the main gas supply valve, and exit the building. After that, call a commercial heating contractor to report the incident and schedule an emergency repair.

2. Checking the Thermostat

After your repair technician arrives, they'll start by checking the thermostat. A faulty thermostat often displays wrong readings that can lead to inefficient heating. It can also lead to short cycling. Your commercial heating contractor might recommend replacing the thermostat's batteries, a few of its components, or the entire thermostat. After fixing or replacing the thermostat, they will set it right to ensure you don't encounter the same problem.

3. Inspect the Heat Exchanger

The heat exchanger in a heating system warms the air that passes into the system before releasing it into your commercial property. The heat exchanger might produce combustion gases such as carbon monoxide when operating. Fortunately, a well-functioning system redirects the byproducts out of the commercial building to keep you safe.

But if the exchanger is worn out with cracks and holes, the byproducts may build up in your workplace, posing safety hazards. Your heating contractor should help you replace the heat exchanger and restore safety. You'll also need to install carbon monoxide detectors to alert you of leaks in the future.

4. Check Broken Belts or Motors

Your commercial heating system contains a motor driven by a belt to transfer energy to the fans. The fans are responsible for blowing heated air into your space. The belt or motor may be broken if your heating system doesn't produce heat. Your technician might recommend replacing these damaged components to restore normal functionality.

Before the emergency technician arrives, consider observing the relevant safety measures to keep your employees and clients safe. Your commercial heating contractor will diagnose the heating system quickly and repair any faulty parts to warm your commercial building and keep your employees comfortable.

For more information on commercial heating, contact a professional near you.

Share